AI Avatar Agency

AI Avatar Agency — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Concurrency control

In information technology and computer science, especially in the fields of computer programming, operating systems, multiprocessors, and databases, concurrency control ensures that correct results for concurrent operations are generated, while getting those results as quickly as possible. Computer systems, both software and hardware, consist of modules, or components. Each component is designed to operate correctly, i.e., to obey or to meet certain consistency rules. When components that operate concurrently interact by messaging or by sharing accessed data (in memory or storage), a certain component's consistency may be violated by another component. The general area of concurrency control provides rules, methods, design methodologies, and theories to maintain the consistency of components operating concurrently while interacting, and thus the consistency and correctness of the whole system. Introducing concurrency control into a system means applying operation constraints which typically result in some performance reduction. Operation consistency and correctness should be achieved with as good as possible efficiency, without reducing performance below reasonable levels. Concurrency control can require significant additional complexity and overhead in a concurrent algorithm compared to the simpler sequential algorithm. For example, a failure in concurrency control can result in data corruption from torn read or write operations. == Concurrency control in databases == Comments: This section is applicable to all transactional systems, i.e., to all systems that use database transactions (atomic transactions; e.g., transactional objects in Systems management and in networks of smartphones which typically implement private, dedicated database systems), not only general-purpose database management systems (DBMSs). DBMSs need to deal also with concurrency control issues not typical just to database transactions but rather to operating systems in general. These issues (e.g., see Concurrency control in operating systems below) are out of the scope of this section. Concurrency control in Database management systems (DBMS; e.g., Bernstein et al. 1987, Weikum and Vossen 2001), other transactional objects, and related distributed applications (e.g., Grid computing and Cloud computing) ensures that database transactions are performed concurrently without violating the data integrity of the respective databases. Thus concurrency control is an essential element for correctness in any system where two database transactions or more, executed with time overlap, can access the same data, e.g., virtually in any general-purpose database system. Consequently, a vast body of related research has been accumulated since database systems emerged in the early 1970s. A well established concurrency control theory for database systems is outlined in the references mentioned above: serializability theory, which allows to effectively design and analyze concurrency control methods and mechanisms. An alternative theory for concurrency control of atomic transactions over abstract data types is presented in (Lynch et al. 1993), and not utilized below. This theory is more refined, complex, with a wider scope, and has been less utilized in the Database literature than the classical theory above. Each theory has its pros and cons, emphasis and insight. To some extent they are complementary, and their merging may be useful. To ensure correctness, a DBMS usually guarantees that only serializable transaction schedules are generated, unless serializability is intentionally relaxed to increase performance, but only in cases where application correctness is not harmed. For maintaining correctness in cases of failed (aborted) transactions (which can always happen for many reasons) schedules also need to have the recoverability (from abort) property. A DBMS also guarantees that no effect of committed transactions is lost, and no effect of aborted (rolled back) transactions remains in the related database. Overall transaction characterization is usually summarized by the ACID rules below. As databases have become distributed, or needed to cooperate in distributed environments (e.g., Federated databases in the early 1990, and Cloud computing currently), the effective distribution of concurrency control mechanisms has received special attention. === Database transaction and the ACID rules === The concept of a database transaction (or atomic transaction) has evolved in order to enable both a well understood database system behavior in a faulty environment where crashes can happen any time, and recovery from a crash to a well understood database state. A database transaction is a unit of work, typically encapsulating a number of operations over a database (e.g., reading a database object, writing, acquiring lock, etc.), an abstraction supported in database and also other systems. Each transaction has well defined boundaries in terms of which program/code executions are included in that transaction (determined by the transaction's programmer via special transaction commands). Every database transaction obeys the following rules (by support in the database system; i.e., a database system is designed to guarantee them for the transactions it runs): Atomicity - Either the effects of all or none of its operations remain ("all or nothing" semantics) when a transaction is completed (committed or aborted respectively). In other words, to the outside world a committed transaction appears (by its effects on the database) to be indivisible (atomic), and an aborted transaction does not affect the database at all. Either all the operations are done or none of them are. Consistency - Every transaction must leave the database in a consistent (correct) state, i.e., maintain the predetermined integrity rules of the database (constraints upon and among the database's objects). A transaction must transform a database from one consistent state to another consistent state (however, it is the responsibility of the transaction's programmer to make sure that the transaction itself is correct, i.e., performs correctly what it intends to perform (from the application's point of view) while the predefined integrity rules are enforced by the DBMS). Thus since a database can be normally changed only by transactions, all the database's states are consistent. Isolation - Transactions cannot interfere with each other (as an end result of their executions). Moreover, usually (depending on concurrency control method) the effects of an incomplete transaction are not even visible to another transaction. Providing isolation is the main goal of concurrency control. Durability - Effects of successful (committed) transactions must persist through crashes (typically by recording the transaction's effects and its commit event in a non-volatile memory). The concept of atomic transaction has been extended during the years to what has become Business transactions which actually implement types of Workflow and are not atomic. However also such enhanced transactions typically utilize atomic transactions as components. === Why is concurrency control needed? === If transactions are executed serially, i.e., sequentially with no overlap in time, no transaction concurrency exists. However, if concurrent transactions with interleaving operations are allowed in an uncontrolled manner, some unexpected, undesirable results may occur, such as: The lost update problem: A second transaction writes a second value of a data-item (datum) on top of a first value written by a first concurrent transaction, and the first value is lost to other transactions running concurrently which need, by their precedence, to read the first value. The transactions that have read the wrong value end with incorrect results. The dirty read problem: Transactions read a value written by a transaction that has been later aborted. This value disappears from the database upon abort, and should not have been read by any transaction ("dirty read"). The reading transactions end with incorrect results. The incorrect summary problem: While one transaction takes a summary over the values of all the instances of a repeated data-item, a second transaction updates some instances of that data-item. The resulting summary does not reflect a correct result for any (usually needed for correctness) precedence order between the two transactions (if one is executed before the other), but rather some random result, depending on the timing of the updates, and whether certain update results have been included in the summary or not. Most high-performance transactional systems need to run transactions concurrently to meet their performance requirements. Thus, without concurrency control such systems can neither provide correct results nor maintain their databases consistently. === Concurrency control mechanisms === ==== Categories ==== The main categories of concurrency control mechanis
Read more →
Freemake Video Converter

Freemake Video Converter is a freemium video editing app developed by Ellora Assets Corporation. Designed primarily for entry-level users, the software offers a range of functionalities including video format conversion, DVD ripping, and the creation of photo slideshows and music visualizations. Additionally, Freemake Video Converter is capable of burning video streams that are compatible with various media, such as DVDs and Blu-ray Discs. It also features direct video uploading capabilities to platforms like YouTube., enhancing its utility for content creators. The application's user-friendly interface and broad compatibility make it accessible for individuals with minimal video editing experience. == Features == Freemake Video Converter can perform simple non-linear video editing tasks, such as cutting, rotating, flipping, and combining multiple videos into one file with transition effects. It can also create photo slideshows with background music. Users are then able to upload these videos to YouTube. Freemake Video Converter can read the majority of video, audio, and image formats, and outputs them to AVI, MP4, WMV, Matroska, FLV, SWF, 3GP, DVD, Blu-ray, MPEG and MP3. The program also prepares videos supported by various multimedia devices, including Apple devices (iPod, iPhone, iPad), Xbox, Sony PlayStation, Samsung, Nokia, BlackBerry, and Android mobile devices. The software is able to perform DVD burning and is able to convert videos, photographs, and music into DVD video. The user interface is based on Windows Presentation Foundation technology. Freemake Video Converter supports NVIDIA CUDA technology for H.264 video encoding (starting with version 1.2.0). == Important updates == Freemake Video Converter 2.0 was a major update that integrated two new functions: ripping video from online portals and Blu-ray disc creation and burning. Version 2.1 implemented suggestions from users, including support for subtitles, ISO image creation, and DVD to DVD/Blu-ray conversion. With version 2.3 (earlier 2.2 Beta), support for DXVA has been added to accelerate conversion (up to 50% for HD content). Version 3.0 added HTML5 video creation support and new presets for smartphones. Version 4.0 (introduced in April 2013) added a freemium "Gold Pack" of extra features that can be added if a "donation" is paid. Starting with version 4.0.4, released on 27 August 2013, the program adds a promotional watermark at the end of every video longer than 5 minutes unless Gold Pack is activated. Version 4.1.9, released on 25 November 2015 added support for drag-and-drop functions that were not available in prior versions. Since at least version 4.1.9.44 (1 May 2017), the Freemake Welcome Screen is added at the beginning of the video, and the big Freemake logo is watermarked in the center of the whole video. This decreases the quality of free outputs, and users are forced to pay money to remove the watermark or stop using it. Version 4.1.9.31 (11 August 2016) does not have this restriction. == Licensing issues == FFmpeg has added Freemake Video Converter v1.3 to its Hall of Shame. An issue tracker entry for this product, opened on 16 December 2010, says it is in violation of the GNU General Public License as it is distributing components of the FFmpeg project without including due credit. Ellora Assets Corporation has not responded yet. == Bundled software from sponsors == Since version 4.0, Freemake Video Converter's installer includes a potentially unwanted search toolbar from Conduit as well as SweetPacks malware. Although users can decline the software during installation, the opt-out option is rendered in gray, which could mistakenly give the impression that it's disabled.
Read more →
Baby Bundle (app)

Baby Bundle is a parenting mobile app for iPhone and iPad. It was designed to help new parents through pregnancy and the first two years of parenthood. Developed in collaboration with medical experts, it helps track and record the child's development and growth, offers parental advice, manages vaccinations and health check-ups, stores photos and provides baby monitoring services. == History == Baby Bundle was founded in the United Kingdom by brothers, Nick and Anthony von Christierson. Each worked in investment banking prior to developing Baby Bundle, Nick at Greenhill & Co., and Anthony at Goldman Sachs. The idea for the app came when a friend's wife voiced her frustration over having multiple parenting apps on her smartphone. Nick and Anthony left their jobs to create a single app that would include all those features. They conducted market research by interviewing more than 500 parents in the UK and US. It took them a year to build the app, which was named by their mother. Looking for endorsement, they first went to the US in 2013 and partnered with parenting expert and pediatrician Dr. Jennifer Trachtenberg. Baby Bundle was launched in the US and Canadian App Stores in April 2014. In the same month, it became the #1 parenting app in iTunes and was featured by Apple as the #1 Editor's pick across all categories. Mashable called it one of the "Top 5 Can’t Miss Apps." Baby Bundle raised $1.8m seed round in March 2015 to fund development. The money came from a range of angel investors from across the US, UK and Asia. The von Christierson brothers have signed a deal to co-brand the app in the Middle East and expect to launch in Europe and Africa. == Features == Baby Bundle is an app for both the iPhone or iPad and provides smart monitoring tools and trackers for pregnancy and child development. It acts as a growth and daily activity tracker and offers parental advice, manages vaccinations and health check-ups. It has a parenting guide with tips and advice on what to expect when the baby arrives. An interactive forum also lets parents ask questions from others in the community. The app is free and also include paid premium features like the ability to turn two iPhones running into a baby monitor, a cloud service to share the child's data with a spouse and the ability to store data on more than one baby.
Read more →
Speech recognition

Speech recognition (automatic speech recognition (ASR), computer speech recognition, or speech-to-text (STT)) is a sub-field of computational linguistics concerned with methods and technologies that translate spoken language into text or other interpretable forms. Speech recognition applications include voice user interfaces, where the user speaks to a device, which "listens" and processes the audio. Common voice applications include interpreting commands for calling, call routing, home automation, and aircraft control. These applications are called direct voice input. Productivity applications include searching audio recordings, creating transcripts, and dictation. Speech recognition can be used to analyse speaker characteristics, such as identifying native language using pronunciation assessment. Voice recognition (speaker identification) refers to identifying the speaker, rather than speech contents. Recognizing the speaker can simplify the task of translating speech in systems trained on a specific person's voice. It can also be used to authenticate the speaker as part of a security process. == History == Applications for speech recognition developed over many decades, with progress accelerated due to advances in deep learning and the use of big data. These advances are reflected in an increase in academic papers, and greater system adoption. Key areas of growth include vocabulary size, more accurate recognition for unfamiliar speakers (speaker independence), and faster processing speed. === Pre-1970 === 1952 – Bell Labs researchers, Stephen Balashek, R. Biddulph, and K. H. Davis, built Audrey for single-speaker digit recognition. Their system located the formants in the power spectrum of each utterance. 1960 – Gunnar Fant developed and published the source–filter model of speech production. 1962 – IBM's 16-word "Shoebox" machine's speech recognition debuted at the 1962 World's Fair. 1966 – Linear predictive coding, a speech coding method, was proposed by Fumitada Itakura of Nagoya University and Shuzo Saito of Nippon Telegraph and Telephone. 1969 – Funding at Bell Labs came to a halt for several years after the company's head engineer, John R. Pierce, wrote an open letter criticizing speech recognition research. This defunding lasted until Pierce retired and James L. Flanagan took over. Raj Reddy was the first person to work on continuous speech recognition, as a graduate student at Stanford University in the late 1960s. Previous systems required users to pause after each word. Reddy's system issued spoken commands for playing chess. Around this time, Soviet researchers invented the dynamic time warping (DTW) algorithm and used it to create a recognizer capable of operating on a 200-word vocabulary. DTW processed speech by dividing it into short frames (e.g. 10 ms segments) and treating each frame as a unit. Speaker independence, however, remained unsolved. === 1970–1990 === 1971 – DARPA funded a five-year speech recognition research project, Speech Understanding Research, seeking a minimum vocabulary size of 1,000 words. The project considered speech understanding a key to achieving progress in speech recognition, which was later disproved. BBN, IBM, Carnegie Mellon (CMU), and Stanford Research Institute participated. 1972 – The IEEE Acoustics, Speech, and Signal Processing group held a conference in Newton, Massachusetts. 1976 – The first ICASSP was held in Philadelphia, which became a major venue for publishing on speech recognition. During the late 1960s, Leonard Baum developed the mathematics of Markov chains at the Institute for Defense Analysis. A decade later, at CMU, Raj Reddy's students James Baker and Janet M. Baker began using the hidden Markov model (HMM) for speech recognition. James Baker had learned about HMMs while at the Institute for Defense Analysis. HMMs enabled researchers to combine sources of knowledge, such as acoustics, language, and syntax, in a unified probabilistic model. By the mid-1980s, Fred Jelinek's team at IBM created a voice-activated typewriter called Tangora, which could handle a 20,000-word vocabulary. Jelinek's statistical approach placed less emphasis on emulating human brain processes in favor of statistical modelling. (Jelinek's group independently discovered the application of HMMs to speech.) This was controversial among linguists since HMMs are too simplistic to account for many features of human languages. However, the HMM proved to be a highly useful way for modelling speech and replaced dynamic time warping as the dominant speech recognition algorithm in the 1980s. 1982 – Dragon Systems, founded by James and Janet M. Baker, was one of IBM's few competitors. === Practical speech recognition === The 1980s also saw the introduction of the n-gram language model. 1987 – The back-off model enabled language models to use multiple-length n-grams, and CSELT used HMM to recognize languages (in software and hardware, e.g. RIPAC). At the end of the DARPA program in 1976, the best computer available to researchers was the PDP-10 with 4 MB of RAM. It could take up to 100 minutes to decode 30 seconds of speech. Practical products included: 1984 – the Apricot Portable was released with up to 4096 words support, of which only 64 could be held in RAM at a time. 1987 – a recognizer from Kurzweil Applied Intelligence 1990 – Dragon Dictate, a consumer product released in 1990. AT&T deployed the Voice Recognition Call Processing service in 1992 to route telephone calls without a human operator. The technology was developed by Lawrence Rabiner and others at Bell Labs. By the early 1990s, the vocabulary of the typical commercial speech recognition system had exceeded the average human vocabulary. Reddy's former student, Xuedong Huang, developed the Sphinx-II system at CMU. Sphinx-II was the first to do speaker-independent, large vocabulary, continuous speech recognition, and it won DARPA's 1992 evaluation. Handling continuous speech with a large vocabulary was a major milestone. Huang later founded the speech recognition group at Microsoft in 1993. Reddy's student Kai-Fu Lee joined Apple, where, in 1992, he helped develop the Casper speech interface prototype. Lernout & Hauspie, a Belgium-based speech recognition company, acquired other companies, including Kurzweil Applied Intelligence in 1997 and Dragon Systems in 2000. L&H was used in Windows XP. L&H was an industry leader until an accounting scandal destroyed it in 2001. L&H speech technology was bought by ScanSoft, which became Nuance in 2005. Apple licensed Nuance software for its digital assistant Siri. ==== 2000s ==== In the 2000s, DARPA sponsored two speech recognition programs: Effective Affordable Reusable Speech-to-Text (EARS) in 2002, followed by Global Autonomous Language Exploitation (GALE) in 2005. Four teams participated in EARS: IBM; a team led by BBN with LIMSI and the University of Pittsburgh; Cambridge University; and a team composed of ICSI, SRI, and the University of Washington. EARS funded the collection of the Switchboard telephone speech corpus, which contained 260 hours of recorded conversations from over 500 speakers. The GALE program focused on Arabic and Mandarin broadcast news. Google's first effort at speech recognition came in 2007 after recruiting Nuance researchers. Its first product, GOOG-411, was a telephone-based directory service. Since at least 2006, the U.S. National Security Agency has employed keyword spotting, allowing analysts to index large volumes of recorded conversations and identify speech containing "interesting" keywords. Other government research programs focused on intelligence applications, such as DARPA's EARS program and IARPA's Babel program. In the early 2000s, speech recognition was dominated by hidden Markov models combined with feed-forward artificial neural networks (ANN). Later, speech recognition was taken over by long short-term memory (LSTM), a recurrent neural network (RNN) published by Sepp Hochreiter & Jürgen Schmidhuber in 1997. LSTM RNNs avoid the vanishing gradient problem and can learn "Very Deep Learning" tasks that require memories of events that happened thousands of discrete time steps earlier, which is important for speech. Around 2007, LSTMs trained with Connectionist Temporal Classification (CTC) began to outperform. In 2015, Google reported a 49 percent error‑rate reduction in its speech recognition via CTC‑trained LSTM. Transformers, a type of neural network based solely on attention, were adopted in computer vision and language modelling, and then to speech recognition. Deep feed-forward (non-recurrent) networks for acoustic modelling were introduced in 2009 by Geoffrey Hinton and his students at the University of Toronto, and by Li Deng and colleagues at Microsoft Research. In contrast to the prioer incremental improvements, deep learning decreased error rates by 30%. Both shallow and deep forms (e.g., recurrent nets) of ANNs had been explored since the 1980s. Howev
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
Lawbot

Lawbots are a broad class of customer-facing legal AI applications that are used to automate specific legal tasks, such as document automation and legal research. The terms robot lawyer and lawyer bot are used as synonyms to lawbot. A robot lawyer or a robo-lawyer refers to a legal AI application that can perform tasks that are typically done by paralegals or young associates at law firms. However, there is some debate on the correctness of the term. Some commentators say that legal AI is technically speaking neither a lawyer nor a robot and should not be referred to as such. Other commentators believe that the term can be misleading and note that the robot lawyer of the future will not be one all-encompassing application but a collection of specialized bots for various tasks. Lawbots use various artificial intelligence techniques or other intelligent systems to limit humans' direct ongoing involvement in certain steps of a legal matter. The user interfaces on lawbots vary from smart searches and step-by-step forms to chatbots. Consumer and enterprise-facing lawbot solutions often do not require direct supervision from a legal professional. Depending on the task, some client-facing solutions used at law firms operate under an attorney supervision. == Levels of autonomy == The following levels of autonomy (LoA) are suggested for automated AI legal reasoning: Level 0 (LoA0): No automation for AI legal reasoning Level 1 (LoA1): Simple assistance automation Level 2 (LoA2): Advanced assistance automation Level 3 (LoA3): Semi-autonomous automation Level 4 (LoA4): Domain automation Level 5 (LoA5): Fully-autonomous automation Level 6 (LoA6): Superhuman automation == Examples == Some legal AI solutions are developed and marketed directly to the customers or consumers, whereas other applications are tools for the attorneys at law firms. There are already hundreds of legal AI solutions that operate in multitude of ways varying in sophistication and dependence on scripted algorithms. One notable legal technology chatbot application is DoNotPay. It had started off as an app for contesting parking tickets, but has since expanded to include features that help users with many different types of legal issues, ranging from consumer protection to immigration rights and other social issues. == Impact on the legal industry == In the 2016 report, Deloitte estimated that more than 110,000 law jobs in just the United Kingdom alone could disappear within the next twenty years due to automation. This change could result in the creation of more highly skilled jobs and in the reduction of paralegal and temporary positions. Deloitte's report asserts that "there is significant potential for high-skilled roles that involve repetitive processes to be automated by smart and self-learning algorithms". According to Lawyers to Engage, between 22% of a lawyer’s work and 35% of a legal assistant’s work can be automated in the US. Top law schools like Harvard have already begun to integrate Artificial Intelligence into the curriculum. Legal tech start-up companies have begun developing applications that assist law firms with completing low-risk legal processes. These applications can enable lawyers to focus on more work that requires their specific expertise. The automation of processes like contract reviewing, enforcement of negotiations (smart contracts) and client intake (expert systems) allows law firms to streamline their procedures and improve efficiency. In addition, automation benefits small-to-medium law firms that do not have the resources to utilize junior talent on such routine tasks. The increase of law firms utilizing automated applications could result into legal tech becoming a necessity in the industry. Digital Reason CEO, Tim Estes, stated that those who refuse the opportunity to integrate AI in their workflow are “most at risk.” In 2018, Forbes reported a 713% increase in investments in legal tech. This rapid growth is reflective of law firms beginning to “cede business to… new model legal providers… that meld technological, business and legal expertise.” == Access to law and justice == It has been widely estimated for at least the last generation that all the programs and resources devoted to ensuring access to justice address only 20% of the civil legal needs of low-income people in the United States. Drawing on this experience, in late 2011, the U.S. government-funded Legal Services Corporation decided to convene a summit of leaders to explore how best to use technology in the access-to-justice community. The group adopted a mission for The Summit on the Use of Technology to Expand Access to Justice (Summit) consistent with the magnitude of the challenge: "to explore the potential of technology to move the United States toward providing some form of effective assistance to 100% of persons otherwise unable to afford an attorney for dealing with essential civil legal needs". In April 2017, joined by Microsoft and Pro Bono Net, the Legal Services Corporation (LSC) announced a pilot program to develop online, statewide legal portals to direct individuals with civil legal needs to the most appropriate forms of assistance. == Technological limitations == Current research in subjects such as computational privacy, explainable machine learning, Bayesian deep learning, knowledge-intensive machine learning, and transfer learning reveals that we do not yet have the technology to enable Level 4 to 6 AI lawbots. In 2023, OpenLaw began developing a model called Law Bot, which interacts in a conversational way as an attorney. The dialogue format makes it possible for Law Bot to answer follow-up questions, challenge incorrect premises, and reject inappropriate requests. Currently, they try to ensure it is in full compliance with all laws and regulations while conducting further beta testing before releasing it to the general public.
Read more →
Word error rate

Word error rate (WER) is a common metric of the performance of a speech recognition or machine translation system. The WER metric typically ranges from 0 to 1, where 0 indicates that the compared pieces of text are exactly identical, and 1 (or larger) indicates that they are completely different with no similarity. This way, a WER of 0.8 means that there is an 80% error rate for compared sentences. The general difficulty of measuring performance lies in the fact that the recognized word sequence can have a different length from the reference word sequence (supposedly the correct one). The WER is derived from the Levenshtein distance, working at the word level instead of the phoneme level. The WER is a valuable tool for comparing different systems as well as for evaluating improvements within one system. This kind of measurement, however, provides no details on the nature of translation errors and further work is therefore required to identify the main source(s) of error and to focus any research effort. This problem is solved by first aligning the recognized word sequence with the reference (spoken) word sequence using dynamic string alignment. Examination of this issue is seen through a theory called the power law that states the correlation between perplexity and word error rate. Word error rate can then be computed as: W E R = S + D + I N = S + D + I S + D + C {\displaystyle {\mathit {WER}}={\frac {S+D+I}{N}}={\frac {S+D+I}{S+D+C}}} where S is the number of substitutions, D is the number of deletions, I is the number of insertions, C is the number of correct words, N is the number of words in the reference (N=S+D+C) The intuition behind 'deletion' and 'insertion' is how to get from the reference to the hypothesis. So if we have the reference "This is wikipedia" and hypothesis "This _ wikipedia", we call it a deletion. Note that since N is the number of words in the reference, the word error rate can be larger than 1.0, namely if the number of insertions I is larger than the number of correct words C. When reporting the performance of a speech recognition system, sometimes word accuracy (WAcc) is used instead: W A c c = 1 − W E R = N − S − D − I N = C − I N {\displaystyle {\mathit {WAcc}}=1-{\mathit {WER}}={\frac {N-S-D-I}{N}}={\frac {C-I}{N}}} Since the WER can be larger than 1.0, the word accuracy can be smaller than 0.0. == Experiments == It is commonly believed that a lower word error rate shows superior accuracy in recognition of speech, compared with a higher word error rate. However, at least one study has shown that this may not be true. In a Microsoft Research experiment, it was shown that, if people were trained under "that matches the optimization objective for understanding", (Wang, Acero and Chelba, 2003) they would show a higher accuracy in understanding of language than other people who demonstrated a lower word error rate, showing that true understanding of spoken language relies on more than just high word recognition accuracy. == Other metrics == One problem with using a generic formula such as the one above, however, is that no account is taken of the effect that different types of error may have on the likelihood of successful outcome, e.g. some errors may be more disruptive than others and some may be corrected more easily than others. These factors are likely to be specific to the syntax being tested. A further problem is that, even with the best alignment, the formula cannot distinguish a substitution error from a combined deletion plus insertion error. Hunt (1990) has proposed the use of a weighted measure of performance accuracy where errors of substitution are weighted at unity but errors of deletion and insertion are both weighted only at 0.5, thus: W E R = S + 0.5 D + 0.5 I N {\displaystyle {\mathit {WER}}={\frac {S+0.5D+0.5I}{N}}} There is some debate, however, as to whether Hunt's formula may properly be used to assess the performance of a single system, as it was developed as a means of comparing more fairly competing candidate systems. A further complication is added by whether a given syntax allows for error correction and, if it does, how easy that process is for the user. There is thus some merit to the argument that performance metrics should be developed to suit the particular system being measured. Whichever metric is used, however, one major theoretical problem in assessing the performance of a system is deciding whether a word has been “mis-pronounced,” i.e. does the fault lie with the user or with the recogniser. This may be particularly relevant in a system which is designed to cope with non-native speakers of a given language or with strong regional accents. The pace at which words should be spoken during the measurement process is also a source of variability between subjects, as is the need for subjects to rest or take a breath. All such factors may need to be controlled in some way. For text dictation it is generally agreed that performance accuracy at a rate below 95% is not acceptable, but this again may be syntax and/or domain specific, e.g. whether there is time pressure on users to complete the task, whether there are alternative methods of completion, and so on. The term "Single Word Error Rate" is sometimes referred to as the percentage of incorrect recognitions for each different word in the system vocabulary. == Edit distance == The word error rate may also be referred to as the length normalized edit distance. The normalized edit distance between X and Y, d( X, Y ) is defined as the minimum of W( P ) / L ( P ), where P is an editing path between X and Y, W ( P ) is the sum of the weights of the elementary edit operations of P, and L(P) is the number of these operations (length of P).
Read more →
Voice user interface

A voice user interface (VUI) enables spoken human interaction with computers, using speech recognition to understand spoken commands and answer questions, and typically text to speech to play a reply. A voice command device is a device controlled with a voice user interface. Voice user interfaces have been added to automobiles, home automation systems, computer operating systems, home appliances like washing machines and microwave ovens, and television remote controls. They are the primary way of interacting with virtual assistants on smartphones and smart speakers. Older automated attendants (which route phone calls to the correct extension) and interactive voice response systems (which conduct more complicated transactions over the phone) can respond to the pressing of keypad buttons via DTMF tones, but those with a full voice user interface allow callers to speak requests and responses without having to press any buttons. Newer voice command devices are speaker-independent, so they can respond to multiple voices, regardless of accent or dialectal influences. They are also capable of responding to several commands at once, separating vocal messages, and providing appropriate feedback, accurately imitating a natural conversation. == Overview == A VUI is the interface to any speech application. Only a short time ago, controlling a machine by simply talking to it was only possible in science fiction. Until recently, this area was considered to be artificial intelligence. However, advances in technologies like text-to-speech, speech-to-text, natural language processing, and cloud services contributed to the mass adoption of these types of interfaces. VUIs have become more commonplace, and people are taking advantage of the value that these hands-free, eyes-free interfaces provide in many situations. VUIs rely on the ability to process input reliably, inconsistent performance often leads to decreased user engagement and negative feedback. Designing a good VUI requires interdisciplinary talents of computer science, linguistics and human factors such as psychology. Even with advanced development tools, constructing an effective VUI requires understanding of both the tasks to be performed, as well as the target audience that will use the final system. The closer the VUI matches the user's mental model of the task, the easier it will be to use with little or no training, resulting in both higher efficiency and higher user satisfaction. A VUI designed for the general public should emphasize ease of use and provide a lot of help and guidance for first-time callers. In contrast, a VUI designed for a small group of power users (including field service workers), should focus more on productivity and less on help and guidance. Such applications should streamline the call flows, minimize prompts, eliminate unnecessary iterations and allow elaborate "mixed initiative dialogs", which enable callers to enter several pieces of information in a single utterance and in any order or combination. In short, speech applications have to be carefully crafted for the specific business process that is being automated. Not all business processes render themselves equally well for speech automation. In general, the more complex the inquiries and transactions are, the more challenging they will be to automate, and the more likely they will be to fail with the general public. In some scenarios, automation is simply not applicable, so live agent assistance is the only option. A legal advice hotline, for example, would be very difficult to automate. On the flip side, speech is perfect for handling quick and routine transactions, like changing the status of a work order, completing a time or expense entry, or transferring funds between accounts. == History == Early applications for VUI included voice-activated dialing of phones, either directly or through a (typically Bluetooth) headset or vehicle audio system. In 2007, a CNN business article reported that voice command was over a billion dollar industry and that companies like Google and Apple were trying to create speech recognition features. In the years since the article was published, the world has witnessed a variety of voice command devices. Additionally, Google has created a speech recognition engine called Pico TTS and Apple released Siri. Voice command devices are becoming more widely available, and innovative ways for using the human voice are always being created. For example, Business Week suggests that the future remote controller is going to be the human voice. Currently Xbox Live allows such features and Jobs hinted at such a feature on the new Apple TV. == Voice command software products on computing devices == Both Apple Mac and Windows PC provide built in speech recognition features for their latest operating systems. === Microsoft Windows === Two Microsoft operating systems, Windows 7 and Windows Vista, provide speech recognition capabilities. Microsoft integrated voice commands into their operating systems to provide a mechanism for people who want to limit their use of the mouse and keyboard, but still want to maintain or increase their overall productivity. ==== Windows Vista ==== With Windows Vista voice control, a user may dictate documents and emails in mainstream applications, start and switch between applications, control the operating system, format documents, save documents, edit files, efficiently correct errors, and fill out forms on the Web. The speech recognition software learns automatically every time a user uses it, and speech recognition is available in English (U.S.), English (U.K.), German (Germany), French (France), Spanish (Spain), Japanese, Chinese (Traditional), and Chinese (Simplified). In addition, the software comes with an interactive tutorial, which can be used to train both the user and the speech recognition engine. ==== Windows 7 ==== In addition to all the features provided in Windows Vista, Windows 7 provides a wizard for setting up the microphone and a tutorial on how to use the feature. ==== Mac OS X ==== All Mac OS X computers come pre-installed with the speech recognition software. The software is user-independent, and it allows for a user to, "navigate menus and enter keyboard shortcuts; speak checkbox names, radio button names, list items, and button names; and open, close, control, and switch among applications." However, the Apple website recommends a user buy a commercial product called Dictate. === Commercial products === If a user is not satisfied with the built in speech recognition software or a user does not have a built speech recognition software for their OS, then a user may experiment with a commercial product such as Braina Pro or DragonNaturallySpeaking for Windows PCs, and Dictate, the name of the same software for Mac OS. == Voice command mobile devices == Any mobile device running Android OS, Microsoft Windows Phone, iOS 9 or later, or Blackberry OS provides voice command capabilities. In addition to the built-in speech recognition software for each mobile phone's operating system, a user may download third party voice command applications from each operating system's application store: Apple App store, Google Play, Windows Phone Marketplace (initially Windows Marketplace for Mobile), or BlackBerry App World. === Android OS === Google has developed an open source operating system called Android, which allows a user to perform voice commands such as: send text messages, listen to music, get directions, call businesses, call contacts, send email, view a map, go to websites, write a note, and search Google. The speech recognition software is available for all devices since Android 2.2 "Froyo", but the settings must be set to English. Google allows for the user to change the language, and the user is prompted when he or she first uses the speech recognition feature if he or she would like their voice data to be attached to their Google account. If a user decides to opt into this service, it allows Google to train the software to the user's voice. Google introduced the Google Assistant with Android 7.0 "Nougat". It is much more advanced than the older version. Amazon.com has the Echo that uses Amazon's custom version of Android to provide a voice interface. === Microsoft Windows === Windows Phone is Microsoft's mobile device's operating system. On Windows Phone 7.5, the speech app is user independent and can be used to: call someone from your contact list, call any phone number, redial the last number, send a text message, call your voice mail, open an application, read appointments, query phone status, and search the web. In addition, speech can also be used during a phone call, and the following actions are possible during a phone call: press a number, turn the speaker phone on, or call someone, which puts the current call on hold. Windows 10 introduces Cortana, a voice control system that replaces the formerly used voice control on Windows
Read more →
Screen space ambient occlusion

Screen space ambient occlusion (SSAO) is a computer graphics technique for efficiently approximating the ambient occlusion effect in real time. It was developed by Vladimir Kajalin while working at Crytek and was used for the first time in 2007 by the video game Crysis, also developed by Crytek. == Implementation == The algorithm is implemented as a pixel shader, analyzing the scene depth buffer which is stored in a texture. For every pixel on the screen, the pixel shader samples the depth values around the current pixel and tries to compute the amount of occlusion from each of the sampled points. In its simplest implementation, the occlusion factor depends only on the depth difference between sampled point and current point. Without additional smart solutions, such a brute force method would require about 200 texture reads per pixel for good visual quality. This is not acceptable for real-time rendering on current graphics hardware. In order to get high quality results with far fewer reads, sampling is performed using a randomly rotated kernel. The kernel orientation is repeated every N screen pixels in order to have only high-frequency noise in the final picture. In the end this high frequency noise is greatly removed by a NxN post-process blurring step taking into account depth discontinuities (using methods such as comparing adjacent normals and depths). Such a solution allows a reduction in the number of depth samples per pixel to about 16 or fewer while maintaining a high quality result, and allows the use of SSAO in soft real-time applications like computer games. Compared to other ambient occlusion solutions, SSAO has the following advantages: Independent from scene complexity. No data pre-processing needed, no loading time and no memory allocations in system memory. Works with dynamic scenes. Works in the same consistent way for every pixel on the screen. No CPU usage – it can be executed completely on the GPU. May be easily integrated into any modern graphics pipeline. SSAO also has the following disadvantages: Rather local and in many cases view-dependent, as it is dependent on adjacent texel depths which may be generated by any geometry whatsoever. Hard to correctly smooth/blur out the noise without interfering with depth discontinuities, such as object edges (the occlusion should not "bleed" onto objects). Because SSAO operates only on the current depth buffer, it can miss occluding geometry that is not rasterized into the z-buffer and may produce undersampling-related artifacts.
Read more →
Wilkinson's Grammar of Graphics

The Grammar of Graphics (GoG) is a grammar-based system for representing graphics to provide grammatical constraints on the composition of data and information visualizations. A graphical grammar differs from a graphics pipeline as it focuses on semantic components such as scales and guides, statistical functions, coordinate systems, marks and aesthetic attributes. For example, a bar chart can be converted into a pie chart by specifying a polar coordinate system without any other change in graphical specification. The grammar of graphics concept was launched by Leland Wilkinson in 2001 (Wilkinson et al., 2001; Wilkinson, 2005) and graphical grammars have since been written in a variety of languages with various parameterisations and extensions. The major implementations of graphical grammars are nViZn created by a team at SPSS/IBM, followed by Polaris focusing on multidimensional relational databases which is commercialised as Tableau, a revised Layered Grammar of Graphics by Hadley Wickham in Ggplot2, and Vega-Lite which is a visualisation grammar with added interactivity. The grammar of graphics continues to evolve with alternate parameterisations, extensions, or new specifications. == Wilkinson's Grammar of Graphics == === Theory === Wilkinson conceived the seven elements of a graphics to be Variables: mapping of objects to values represented in a graphic Algebra: operations to combine variables and specify dimensions of graphs Geometry: creation of geometric graphs from variables Aesthetics: sensory attributes Statistics: functions to change the appearance and representation of graphs Scales: represent variables on measured dimensions Coordinates: mapping to coordinate systems With these, Wilkinson hypothesised that These seven constructs are orthogonal and virtually all known statistical charts can be generated relatively parsimoniously This computational system is not a taxonomy of charts and rather it describes the meaning of what we do when we construct statistical graphics. === Implementations === Wilkinson wrote SYSTAT, a statistical software package, in the early 1980s. This program was noted for its comprehensive graphics, including the first software implementation of the heatmap display now widely used among biologists. After his company grew to 50 employees, he sold it to SPSS in 1995. At SPSS, he assembled a team of graphics programmers who developed the nViZn platform that produces the visualizations in SPSS, Clementine, and other analytics products. While at Stanford, Tableau founders Hanrahan and Stolte, as well as Diane Tang, created the predecessor to Tableau, named Polaris. Polaris was a data visualization software tool, built with the support of a United States Department of Energy defense program, the Accelerated Strategic Computing Initiative (ASCI). The main differences between Wilkinson's system and Polaris are the use of SQL relational algebra for database services and using shelves instead of cross and nest operators. == Wickham's Layered Grammar of Graphics == === Theory === Hadley Wickham conceived an alternate parameterisation of the syntax Wilkinson had derived, creating a layered grammar of graphics which he implemented as ggplot2 for R (programming language) users. This added a hierarchy of defaults based around the idea of building up a graphic from multiple layers. Wickham conceived these elements to be: Defaults: consists of data and mapping Data: dataset Mapping: aesthetic mappings Layer: consists of data, mapping, geom, stat, and position Data: dataset, or inherit from defaults Mapping: aesthetic mappings, or inherit from defaults Geom: geometric object Stat: statistical transformation Position: position adjustment Scale: mapping of data to aesthetic attributes Coord: mapping of data to the plane of the plot Facet: split up the data === Reception === Wilkinson is generally positive on Wickham's parameterisation and implementation of ggplot2, praising its elegance and expressivity whilst claiming that his original Grammar of Graphics is capable of representing a wider range of statistical graphics. === Implementations === ggplot2 is the first implementation of a layered grammar of graphics in R and implementations in other programming languages have ensued. These include direct ports plotnine for Python, gramm for MATLAB, Lets-Plot for Kotlin and gadfly for Julia. Projects inspired by elements of Wickham's grammar include Vega-Lite which specifies plots in JSON and uses a JavaScript engine. Implementations for Python include Vega-Altair (built on top of Vega-Lite). == Vega-Lite: A Grammar of Interactive Graphics == === Theory === Vega-Lite combines ideas from Wilkinson's Grammar of Graphics and Wickham's Layered Grammar of Graphics with a composition algebra for layered and multi-view displays with a grammar of interaction. The Vega-Lite specification is instantiated in JSON and rendered by the lower-level Vega. The graphical grammar implemented by Vega-Lite is composed of the following: Unit: consists of data, transforms, mark-type and encoding Data: relational table consisting of records (rows) and named attributes (columns) Transforms: data transformations Mark-type: geometric object for visual encoding Encodings: mapping of data attributes to visual marks properties where each encoding consists of: Channel: e.g. colour, shape, size, or text Field: data attribute Data-type: e.g. nominal, ordinal, quantitative, or temporal Value: use a literal instead of a data-type Functions: e.g. binning, aggregation, and sorting Scale: maps from data domain to visual range Guide: axis or legend for visualising scale Composite Views: compose views from multiple unit specifications with operators: Layer: charts plotted on top of each other Hconcat/Vconcat: place views side-by-side Facet: subset data to produce a trellis plot Repeat: multiple plots similar to facet but with full data replication in each cell Interaction: selections identify the set of points a user is interested in manipulating, with components: Selection: get the minimal number of backing points Name: reference Type: how many backing values are stored Predicate: determine the set of selected points e.g. single, list, interval Domain|Range: store data domain or visual range Event: e.g. mouseover, mousedown, mouseup, Init: initialise with specific backing points Transforms: e.g. project, toggle, translate, zoom, and nearest Resolve: resolve selections to union or intersect ==== Implementations ==== Whilst Vega-Lite is the sole implementation of this graphics grammar specification with compilation to Vega, other implementations do create JSON files which can be interpreted by Vega-Lite. == Related projects == Ggplot2 is an R package for plotting Tableau Software (originally known as Polaris) is a commercial software built using the Grammar of Graphics nViZn built by Wilkinson. SYSTAT (statistics package) built by Wilkinson ggpy, ggplot for Python, but has not been updated since 20 November 2016 plotnine started as an effort to improve the scalability of ggplot for Python and is largely compatible with ggplot2 syntax. Plotly - Interactive, online ggplot2 graphs gramm, a plotting class for MATLAB inspired by ggplot2 gadfly, a system for plotting and visualization written in Julia, based largely on ggplot2 Chart::GGPlot - ggplot2 port in Perl, but has not been updated since 16 March 2023 The Lets-Plot for Python library includes a native backend and a Python API, which was mostly based on the ggplot2 package. Lets-Plot Kotlin API is an open-source plotting library for statistical data implemented using the Kotlin programming language, and is built on the principles of layered graphics first described in the Leland Wilkinson's work The Grammar of Graphics. ggplotnim, plotting library using the Nim programming language inspired by ggplot2. Vega and Vega-Lite are plotting libraries that use JSON to specify plots. Vega-Altair, a Python library built on top of Vega-Lite chart-parts - React-friendly Grammar of Graphics, but has not been updated since 10 Dec 2021 g2 - a JavaScript library
Read more →
Fatsecret

Fatsecret, commonly styled as fatsecret, is a mobile application, website and API that helps people achieve their weight loss goals and find accurate nutrition information. It also offers a weight loss clinic with coaching and medically supported programs. The platform powers global health apps. == History == Fatsecret was founded in 2006 in Melbourne, Australia by Lenny Moses and Rodney Moses. As of 2019, Lenny serves as the company's CEO. The company is known for its calorie counting and meal tracking app, and by April 2016, the company claimed to have 45 million users of its services. In August 2018, a premium version of its app was released. Since August 2009, the company has operated the Fatsecret Platform API, which allows access to its global food and nutrition database. Fatsecret reportedly had 900,000 downloads of its app in January 2020. In an analysis of several Health & Fitness app subcategories for the United States in January 2021, Fatsecret was reported to have the highest 30 day user retention rate of top Calorie Counter + Meal Planner for Weight Loss apps.
Read more →
Artifact (app)

Artifact was a personalized social news aggregator app that uses recommender systems to suggest articles. Launched in January 2023 by Nokto, Inc., a company founded by co-founders of Instagram Kevin Systrom and Mike Krieger, the app is available for iOS and Android. The app's name is a portmanteau of the words "articles", "artificial intelligence", and "fact". The app shut down in January 2024 as a result of low interest. == History == Nokto, Inc. was established on March 3, 2022, as a foreign stock company in California, with its headquarters in San Francisco. The company's main product, Artifact, is the first new product launched by Krieger and Systrom since their 2018 resignation from Instagram after conflicts with parent company Meta, which acquired Instagram in 2012. Artifact launched on January 31, 2023, after the team had been working on it for over a year, offering the option to sign up for a waiting list for its private beta, which grew to about 160,000 people, and then launching in open beta on February 22, 2023. With a team of seven employees in San Francisco, the app was free throughout its lifetime, with the founders explaining at the time that different business models - such as advertising or subscription fees - could be explored in the future. In January 2024, cofounder Kevin Systrom announced that the app would be shutting down after concluding that "the market opportunity isn’t big enough to warrant continued investment in this way." In April 2024, it was announced Artifact had been acquired by Yahoo, who intended to use the service's technology in an upgraded Yahoo! News app. == Features == Frequently described as "TikTok for text" and a competitor to Twitter, Artifact was a news aggregator that used machine learning to make personalized recommendations based on topics, news sources, and authors that the reader is interested in. In addition to reading articles, the app offered the ability to like articles, leave comments, or listen to an audio version of an article read by AI-generated voices, including a simulation of the voices of Snoop Dogg or Gwyneth Paltrow. AI also would rewrite clickbait headlines that users flagged. Artifact later expanded to a social network where users could post links, images and text to their profile, which could be liked or commented on by other users. Similar to other social news websites like Reddit, reader accounts had profiles with reputation scores.
Read more →
Sarpa (snakebite app)

Sarpa or SARPA (Snake Awareness, Rescue and Protection app) is a snakebite app, an application for mobile devices developed in India to provide rapid, life-saving help for victims of snakebite, which kill an estimated 58,000 people a year in India. The app provides information about snakes, gets fast aid for people bitten, and helps in the development of antivenoms. Similar systems developed in India include SnakeHub, Snake Lens, Snakepedia, Serpent and the Big Four Mapping Project. The apps provide rapid response to snakebite incidents, often in remote areas, using a network of volunteers managed by local wildlife departments; their use can save human lives by providing rapid medical care, and also snakes, by helping to avoid interaction between the species. In 2026, it was announced that the app had plans to offer real-time contact from doctors directly from the app to provide users with decision-making advice.
Read more →
CamScanner

CamScanner is a Chinese mobile app first released in 2010 that allows iOS and Android devices to be used as image scanners. It allows users to 'scan' documents (by taking a photo with the device's camera) and share the photo as either a JPEG or PDF. This app is available free of charge on the Google Play Store and the Apple App Store. The app is based on freemium model, with ad-supported free version and a premium version with additional functions. == History == On August 27, 2019, Russian cyber security company Kaspersky Lab discovered that recent versions of the Android app distributed an advertising library containing a Trojan Dropper, which was also included in some apps preinstalled on several Chinese mobiles. The advertising library decrypts a Zip archive which subsequently downloads additional files from servers controlled by hackers, allowing the hackers to control the device, including by showing intrusive advertising or charging paid subscriptions. Google took the app down after Kaspersky reported its findings. An updated version of the app with the advertising library removed was made available on the Google Play Store as of September 5, 2019. Kaspersky later acknowledged "We appreciate the willingness to cooperate that we've seen from CamScanner representatives, as well as the responsible attitude to user safety they demonstrated while eliminating the threat…The malicious modules were removed from the app immediately upon Kaspersky's warning, and Google Play has restored the app." In June 2020, as tensions along the Line of Actual Control between China and India continued, the Government of India decided to ban 118 Chinese apps, including TikTok and CamScanner citing data and privacy issues. On January 5, 2021, US President Donald Trump signed Executive Order 13971 banning Alipay, Tencent's QQ, QQ Wallet, WeChat Pay, CamScanner, Shareit, VMate and WPS Office to conduct US transactions. The Trump administration explained this act by saying that this move helps prevent personal information such as text, phone calls and photos collected from rivals. However, the Biden administration did not meet the February 2021 deadline for implementing the executive order, allowing these apps to operate in the US and revoked the previous executive order Executive Order 14034 of June 9, 2021.
Read more →
VistaCreate

VistaCreate (formerly Crello) is an online graphic design platform for non-designers, launched in 2016. As of 2022, it has more than 10 million users in 192 countries. == Overview == VistaCreate (then known as Crello) was launched in 2016 as a part of Depositphotos. In 2019, the product hit a milestone of 1 million registered users and also launched mobile apps. In 2020, the library of templates and objects became free. A music library and a background remover tool were added to the platform. In May 2021, Moufflons Basketball, in collaboration with VistaCreate, organized a poster design competition in support of gender equality in sports. In October 2021, Vistaprint acquired Crello and its parent company, Depositphotos, for a total price of $85 million. After the acquisition, Crello was rebranded to VistaCreate. Along with Vistaprint and 99designs, it became part of the new Vista parent brand. After Russia started a full-scale war on the territory of Ukraine in February 2022, VistaCreate suspended all business in Russia and Belarus. VistaCreate's team and Depositphotos gathered collections of images and templates dedicated to the war in Ukraine.
Read more →